Description
The OcCre 1/60 HMS Beagle is an unassembled wooden model ship kit that faithfully recreates the Cherokee-class 10-gun brig-sloop famous for carrying Charles Darwin on his historic five-year expedition. Featuring precision laser-cut hardwood frames, double-planked hull timber, pre-sewn cotton cloth sails, cast metal ordnance, and an engraved display cradle, this kit delivers an immersive historical maritime build.
What is included with the Occre 1/60 HMS Beagle?
The OcCre 1/60 HMS Beagle kit includes laser-cut hardwood sheets, double hull planking strakes, cast metal deck fittings, pre-sewn cotton sails, rigging cordage, and a wooden display base with an engraved brass nameplate. Every structural bulkhead, timber strip, and metal fitting is organized for precision assembly guided by step-by-step photographic instructions.
- Laser-Cut Hardwoods: Multi-species fine timber sheets for the central keel spine, transverse bulkheads, decks, and cabin structures.
- Double Planking Timber: High-grade wooden strakes for the inner structural hull and outer finishing planking, highlighting authentic wood tones and the classic white-and-black Nelson-checker livery.
- Photo-Etched Brass & Cast Metal: Cast metal naval guns, anchors, deck winches, deadeye strops, and intricate photo-etched brass accents.
- Pre-Sewn Sails & Rigging: Complete set of stitched cotton sails, multi-gauge rigging cordage for standing and running rigging, and British maritime ensigns.
- Display Stand & Hardware: Custom wooden display cradle and photo-etched brass nameplate reading "HMS Beagle".
What tools and supplies are required for the Occre 1/60 HMS Beagle?
Assembling the OcCre HMS Beagle requires wood PVA glue, cyanoacrylate (medium CA glue), a plank bender, a pin vise with micro-bits, and a hobby knife. To finish the model to museum display standards, modelers will also need wood sealer, fine-grit sanding sponges, masking tape, and acrylic model paints.
- Adhesives & Glues: Wood PVA glue for timber framing and double hull planking; medium and thin CA glue for brass and cast metal fittings.
- Essential Shaping Tools: An electric plank-bending iron or crimping tool to curve hull strakes along the bow and stern contours, accompanied by miniature hobby clamps.
- Rigging & Finishing Tools: Pin vise with micro-drill bits (0.5 mm to 1.5 mm), rigging thread beeswax, fine tweezers, and soft-bristle paintbrushes.
- Paint & Varnish: Black, white, red, and ochre acrylic modeling paints alongside clear satin varnish to highlight and protect natural hardwood grains.
How long does it take to assemble the OcCre 1/60 HMS Beagle?
The OcCre 1/60 HMS Beagle requires approximately up to 480 hours of assembly time, making it an engaging multi-month project for intermediate shipwrights. Builders progress systematically through keel assembly, two layers of hull planking, deck furniture construction, and multi-masted barque rigging.
- Hull Framework & Planking (80–100 hours): Dry-fitting bulkheads, fairing the frame, and installing the primary and secondary hull plank layers.
- Deck Furniture & Fittings (80–100 hours): Constructing companionways, deck hatches, ship's boats on chocks, railings, and mounting cannon carriages.
- Masting & Standing Rigging (80–100 hours): Tapering wooden mast spars, installing shrouds, seizing deadeyes, and rigging ratlines.
- Sails & Running Rigging (60–80 hours): Hanging pre-sewn yards, rigging braces and halyards, and final display base mounting.
The Subject: The Historic Expedition of HMS Beagle (1831–1836)
Launched from the Woolwich Dockyard on the River Thames in May 1820, HMS Beagle was a Cherokee-class 10-gun brig-sloop built for the British Royal Navy. Later converted into a six-gun barque with a raised upper deck for improved open-ocean seaworthiness, her defining mission commenced on December 27, 1831, under the command of Captain Robert FitzRoy.
Aboard as the voyage naturalist was 22-year-old Charles Darwin, whose meticulous observations of fauna, flora, and geology across the Galápagos Islands and South America formed the foundation for his theory of evolution by natural selection. The five-year voyage completed a full circumnavigation of the globe, solidifying the Beagle as one of the most scientifically significant vessels in maritime history.
Kit Architecture & Engineering
OcCre’s HMS Beagle utilizes traditional plank-on-bulkhead engineering, pairing laser-cut structural frames with flexible timber planking strakes to achieve accurate hull curvature. The double-planking method provides a sturdy, forgiving base layer of limewood followed by fine-grain outer hardwoods that take stain and paint evenly.
The upper works feature authentic wooden whaleboats built on mini-jigs, brass deck ventilators, cast naval cannons, and clear photo-etched windows. Every spar, yard, and mast section is turned from select dowel stock, accommodating complete standing and running rigging anchored with turned wooden blocks and deadeyes.
Download the Official Occre Buccaneer Assembly Guide (PDF)
HMS Beagle Assembly Instructions Part 1
HMS Beagle Assembly Instructions Part 2
HMS Beagle Assembly Instructions Part 3
HMS Beagle Assembly Instructions Part 4
Technical Specifications
|
Feature |
Specification |
|
Scale |
1:60 |
|
Manufacturer |
OcCre (Designed & Manufactured in Spain) |
|
Manufacturer Part Number (MPN) |
12005 |
|
Skill Level |
Intermediate |
|
Estimated Build Time |
400–480 Hours |
|
Construction Type |
Plank-on-Bulkhead Wooden Kit |
|
Dimensions (L x H x W) |
28.34" L x 18.9" H x 9.06" W (720 mm x 480 mm x 230 mm) |
|
Primary Materials |
Hardwood Sheets, Strip Planking, Cast Zamak Metal, Photo-Etched Brass, Cotton Fabric |
What You Need: Builder’s Tool Kit & Consumables
To complete this build with professional, display-worthy results, equip your workbench with essential modeling consumables:
- Adhesives & Glues: Standard wood PVA glue for the wooden frame and cyanoacrylate (medium CA glue) for brass and metal deck fittings.
- Specialty Tools: An electric plank-bending iron, miniature bar clamps, a pin vise with micro-bits, and a hobby razor saw.
- Finishing Supplies: Acrylic model paints, sanding sticks (120 to 600 grit), sanding sealer, and satin varnish.
- Diorama & Display Basing: Add Gamers Grass tufts and scenic ballast to your display plinth or diorama showcase to personalize your presentation.









